TL-1 Tool Photos 1

Back Home Up Next

Safety & Access Agreement

 

 

 

 

 

The following photographs show the turning tools generally kept for the HAAS TL-1 CNC Lathe, and should correspond directly with the TL-1 tool list.  TBD tools are included to allow for programs requiring additional or substantially different tools than these.  The first photo of each tool displays the normal I-deas tool orientation.

 

Tool 1 ( rough turn)  L01_SNMG432_RoughTurn.jpg (50284 bytes)L01_SNMG432_W_Inserts.jpg (69002 bytes)

Tool 2 (finish turn) L02_TNMG332_Turn.jpg (29450 bytes)L02_TNMG332_W_Inserts.jpg (82642 bytes)

Tool 3 (square turn) L03_SNMG332_Turn.jpg (34023 bytes)L03_L04_KM16MSDNN09_Assy.jpg (36269 bytes)

Tool 4 (square face) L04_SNMG332_Face.jpg (41492 bytes)

Tool 5 (OD grooving) L05_KMA3_OD_Groove.jpg (31166 bytes)L05_KMA3SR411_W_Inserts.jpg (56346 bytes)

Tool 6 (R.H. contour) L06_KPR51_RH_Contour.jpg (28851 bytes)L06_KM16NKLNR1130_w_Inserts.jpg (50502 bytes)

Tool 7 (L.H. contour) L07_NPL50^5_LH_Contour.jpg (29461 bytes)L07_L08_KM16NKLCL1130_w_Inserts.jpg (56195 bytes)

Tool 8 (face contour) L08_NPL50^5_FaceContour.jpg (35849 bytes)

Tool 9 (Gen. face/turn) L09_CNMG432_FaceTurn.jpg (41232 bytes)

Tool 10 (1/2" cap. drill chuck) L10_DrillChuck_W_TypDrill.jpg (40469 bytes)

Tool 11 (#4 centerdrill)L11_No4C'Drill.jpg (22573 bytes)

Tool 12 (part off) L12_GFN3_PartOff.jpg (81509 bytes)L12_SGFH32-3_w_Inserts.jpg (107232 bytes)

Tool 13 (O.D. thread) L13_NT3R_OD_Thread.jpg (31195 bytes)L13_KM16NSR3_W_Inserts.jpg (49424 bytes)

Tool 14 (OD groove) L14_NR304_OD_Groove.jpg (26926 bytes)

Tool 15 (I.D. thread) L15_TPMK_ID_Thread.jpg (29350 bytes)

Tool 16 (.375 min. bore) L16_L17_L18 Boring Bars.jpg (47637 bytes)

Tool 17 (.500 min. bore) 

Tool 18 (1.00 min. bore)

Tool 19 (TBD)

Tool 20 (Tapping Chuck) L20_ER16TapChuck.jpg (18367 bytes)

Tool 21 (TBD)

Tool 22 (TBD)

Tool 23 (TBD)

Tool 24 (TBD)

Tool 25 (TBD)

All products and services described and / or mentioned herein are registered trademarks, registered servicemarks, trademarks, or servicemarks of their respective companies.

Questions or problems regarding this web site should be directed to the webmaster
Copyright © 2006 The UAH College of Engineering. All rights reserved.
Last modified: Wednesday March 23, 2005.